M00047

Foil Release Additive is designed to provide foil release characteristics to Rutland’s plastisol ink allowing the printer to make multi-color designs with foil adhering to desired areas.

Fabric Types

Other

Features

By mixing M00047 into all layers of ink, the design can be applied to dark shirts and still provide foil release capability.
Provides excellent foil release properties to Rutland’s plastisol inks that have been properly cured.
Can be used in various concentrations to maintain the integrity of the ink film can provide foil release characteristics when printing both light and dark colored garments.

Printing Tips

It is recommended that user evaluate M00047 for use in each application. Special attention should be given to crock and wash testing prior to use.

Mixing Procedure: Mix release agent into Rutland Plastisol Inks at 1-10% (maximum), using a mechanical stirring device, such as a Turnabout™ type mixer or other low shear mechanical mixing devices. (hand stirring is not recommended).

Printing Procedure: Add M00047 to all Rutland Plastisol Inks where foil is not desired per the design.

Print foil release colors through normal printing technique (print-flashprint, etc.). Print Rutland’s Foil Adhesive (ES0274) also known as NPT X-Glue to all areas where foil is desired per the design.

Cure finished print at a minimum of 320°F (160°C) for a minimum of 75 seconds (results vary). Test for fit for desired use. Do not dry clean, bleach, or iron printed image.

Technical Data Sheet

Feel free to live chat with us if you have any questions.

Rutland Specialty Inks

Filters

Rutland M00047 Foil Release Additive